3 Micron Glass Fiber Hydraulic Oil Filter Element HC9024FCP8Z: Applications, Advantages & Care Tips
What Is the HC9024FCP8Z Hydraulic Oil Filter Element?
The HC9024FCP8Z is a 3 micron glass fiber hydraulic oil filter element built to protect servo valves, proportional valves, piston pumps and hydrostatic transmissions. As a direct replacement cartridge for the HC9024 series, it fits a large installed base of hydraulic power units, injection molding machines, hydraulic presses and mobile equipment. Its borosilicate glass microfiber media is pleated into a high-area pack supported by stainless steel mesh, so the element delivers fine 3 micron filtration without excessive pressure drop.
Because more than 70 percent of hydraulic failures trace back to fluid contamination, and particles of 2 to 5 micron are the most damaging, a 3 micron element is the standard choice for systems targeting ISO 4406 16/14/11 or cleaner.

Typical Working Environments and Applications
- Industrial hydraulic power units — return and pressure line filtration for machine tools, die-casting machines and presses.
- Injection molding and extrusion — servo valve protection where 3 micron cleanliness keeps injection repeatability stable.
- Construction and mining machinery — excavators, loaders and drilling rigs exposed to dust, vibration and temperature swings.
- Metallurgy and steel plants — rolling mill lubrication and control circuits facing high heat and water ingress.
- Marine and offshore hydraulics — deck machinery and steering gear in salt-laden air.
- Wind power — gearbox and pitch control circuits where maintenance windows are long and downtime is costly.
It suits mineral hydraulic oils (HM, HLP, HV), lubricating oils and diesel, and with the correct seals also phosphate ester and water-glycol fluids. NBR seals cover -20 °C to +100 °C; FKM and EPDM options extend the range for high-temperature or fire-resistant fluids.

Key Advantages of the 3 Micron Glass Fiber Design
| Feature | Benefit |
|---|---|
| 3 micron absolute rating (beta 3 ≥ 200) | Captures 99.5 percent of particles at 3 micron, holding ISO cleanliness targets. |
| Gradient-density microfiber media | Dirt is trapped through the full depth, raising dirt-holding capacity and service life. |
| High-area pleated pack | Low initial pressure drop, stable flow and lower energy consumption. |
| Stainless steel mesh and robust end caps | Resists pressure surges, flow fatigue and collapse at high differential pressure. |
| Low fiber migration | Keeps loose fibers out of valves and bearings downstream. |
Technical Data at a Glance
| Model | HC9024FCP8Z |
|---|---|
| Media | Borosilicate glass microfiber, pleated |
| Filtration rating | 3 micron (beta 3(c) ≥ 200), approx. 99.5 percent efficiency |
| End caps / support | Coated steel end caps, stainless steel mesh |
| Seal material | NBR standard; FKM / EPDM / PTFE optional |
| Operating temperature | -20 °C to +100 °C (NBR); up to +120 °C with FKM |
| Replacement differential pressure | 2.5 to 3.5 bar (approx. 35 to 50 psi) |
| Test standards | ISO 2941, 2942, 2943, 3724, 3968, 16889 |
Typical values for this element family; please confirm dimensions and pressure ratings against the drawing or OEM part number before ordering.
Installation and Operating Precautions
- Verify the part number. Check element code, length, outer diameter and seal type against the housing or OEM manual.
- Work clean. Clean the housing cover and surrounding area first; a spoonful of external dirt can contaminate a whole reservoir.
- Never wash or reuse glass fiber elements. Backwashing damages the media and destroys the beta rating.
- Seat the element correctly. Lubricate the O-ring with system fluid, confirm full seating and a free-moving bypass valve.
- Respect pressure limits. Do not exceed rated collapse pressure, and allow warm-up after a cold start to avoid pressure spikes.
- Control water and air ingress. Service breathers and return lines regularly; never run the element with fluids incompatible with the seal compound.
Maintenance and Stocking Advice
Replace the element when the differential pressure indicator reaches the recommended change point or at the scheduled interval, whichever comes first. Trend the ISO 4406 cleanliness code during oil analysis: a sudden rise in the 4 micron channel usually signals bypass or media damage. Keep at least one spare per housing, plus one extra set for critical machines that cannot wait for delivery.
Ordering Information
The service life of hydraulic equipment largely depends on oil cleanliness management. The HC9024FCP8Z 3 micron hydraulic filter balances high filtration accuracy, large dirt holding capacity and mechanical stability, protecting expensive hydraulic assets and cutting downtime & maintenance expenses.
ANHUI FILTER supplies bulk orders and sample testing for this model. Custom hydraulic filter elements of various specifications are available to provide one-stop fluid filtration solutions for industrial customers worldwide.
Send your inquiry directly to us